Precision Door of Torrance | Garage Door Repair

Garage Spring Problems That Require Pro Spring Repair in Torrace

Garage door springs are important to the overall functioning of the door. They work with industrial-sized pulley systems that cause the door to roll up and then roll down when released by the command of a wall switch or remote. Of course, they can break or malfunction; this is part of what makes your garage door spring system so important. Here is a look at some common problems with garage door springs and how you can resolve them.

Spring Is Slipping and Needs Spring Repair in Torrance

If your garage door spring is slipping, it will not be able to lift the door. Getting spring repair in Torrance as soon as possible is important, as it can cause other problems with your garage door. When the spring slips, it means that it has lost tension in itself, which causes it to slip off the track. This can be caused by a misalignment of the holes where the torsion arm attaches to the track. This happens when there is too much slack in the springs or if someone has tried to adjust them without adjusting all of them at once. To solve this issue, you will need to adjust all of your torsion springs, so they are all equal in length and have equal tension.

Cracks

A crack in a garage door spring is a serious problem that requires a spring repair in Torrance and could lead to even more damage if not addressed. The advisable way to deal with this issue is to contact a professional as soon as you notice it. A crack in one of your springs can cause the entire system to fail and will cost you more money in the long run if it goes unaddressed.

Stretching

If one or more of your garage door springs are stretched, this could indicate that there has been too much weight put on them over time. If this happens, then there is a chance that they will break suddenly or even snap off altogether. However, before replacing springs simply because they are stretched out too much, it’s best to make sure that there isn’t another reason they might have stretched in the first place. For example, if your garage door opener has been working improperly for some time (perhaps due to poor maintenance), this could cause the springs to become stretched out over time.

Rusty Garage Door Springs

Rusty springs are the most common problem with garage doors in the U.S. This is due to the harsh weather and salty air that is there. The combination of moisture, salt, and steel can cause rust to form quickly on the springs if they are not properly maintained. Rust can cause many problems for your garage door opener, including causing it to fail, which could lead to serious injury or death. It is also possible for rust on your garage door springs to cause them to snap or break without warning.

Broken Garage Door Springs

Broken springs are another common problem with garage doors in the U.S., especially in areas with extreme weather, such as hurricanes or tornadoes. If your spring breaks unexpectedly, it could cause significant damage to your vehicle, other people nearby, and even yourself if you are caught underneath when it happens. Also, broken springs could leave your garage door unable to close properly, meaning that anyone who parks inside your garage would be trapped until someone came along and fixed it for them.

Spring is Sagging

If your garage door spring sags, it will not be able to hold up your door when it closes or opens. This can cause serious damage to your door and opener if left unchecked for too long. The sagging usually occurs when there is too much slack in one or more of the springs or if someone has tried to adjust them without adjusting all of them at once. To fix this issue, you will need to adjust all of your torsion.

Spring is not Aligned with Cable Drums

If your garage door springs are not aligned with the cable drums, this could cause various problems. The most obvious issue would be that the door would not move smoothly up and down. However, there are other potential problems as well. For example, if one side of your garage door is higher than the other, this could cause excess strain on one set of cables while leaving another set unstrained. This could eventually lead to a broken cable or even worse consequences if a spring repair in Torrance is not carried out.

Spring has Too Much Tension

The spring tension on your garage door is an important factor in the overall operation of your roll-up garage doors. If your garage door is not closing all the way, it may be due to a broken spring or too much tension on one or more springs. The foremost thing you should do when you notice that your garage door does not close all the way is to check the springs for signs of wear or damage. If none are found, you should check to ensure that all of the screws are secure and will not come loose during use. If none of these steps work, then you should call a professional for a spring repair in Torrance.

Springs are Aging

Springs are the most common part of garage doors in Torrance to break or wear out. When this happens, you may hear noises from your garage or notice that the door is harder to open and close. The average life span of a spring is about ten years. If you are experiencing problems with your garage door and it is older than ten years, it might be time for new springs.

Off-Tracks

If your garage door won’t open or close all the way, and it appears that one side is lifting higher than the other, then there may be an issue with off-track springs. The springs are supposed to be parallel when installed correctly, but sometimes they can get out of alignment during use or through aging. If this happens, you may need to adjust them back into place so they work properly again. This is not always an easy task; that is why a professional should handle it and determine whether you need a garage door replacement.

Loose Cables

If you notice that one or more cables on your garage door are loose, then you should have these cables tightened immediately. This may seem like a minor problem, but if left unchecked, this could lead to serious problems with your garage door. Loose cables can cause damage to other moving parts on your garage door as well as damage the insulation around these cables. This can allow water into the system, which could lead to rusting or other corrosion issues in the future. It is always best to have a professional of garage door repair in Torrance come out and tighten these cables before it gets worse than it already is.

To ensure a longer life span of your springs, you must perform regular maintenance on them. Having a garage door spring replaced by professional repair services is the best way to keep your doors working safely and efficiently. The longer you wait to replace broken springs or replace them regularly, the higher the chances are that you will have to replace an entire door. Precision Door in Torrance offers effective garage door spring repairs.