Garage Door Won’t Open? Here’s What a Spring Repair Torrance Company Recommends

There’s no doubt about it. One of the most frustrating situations you can find yourself in is getting ready to leave for work only to notice that your garage door isn’t lifting up properly. This type of situation is not only frustrating, but it can also be a little scary if you start thinking about all the money that it’s going to take to fix the problem. Fortunately, according to a spring repair Torrance service company, there are a few things you can do to get your garage door working again. The great news is that not all of them are going to need a professional to do. Read on to learn a couple of troubleshooting recommendations that you can apply to a garage door when it doesn’t open properly.

How to Fix Broken Springs With Spring Repair Torrance

According to many garage door repair companies, broken springs rank among the most common calls from customers when they notice their garage door opening only partially. So, what exactly are these springs? Springs come in two designs, torsion and extension, but they both do the same job. Springs hold onto energy, which allows your door to carefully come down and up. However, when these springs are damaged, they will stop working either partially to completely. In this case, you may have a partial working spring if your door is lifting. Now, unlike other troubleshooting recommendations on this list, it is never a good idea to take care of them on your own as they can easily snap. This may cause damage to the structure and potentially injure anyone nearby. Instead, always contact a spring repair Torrance service company to fix the issue.

Reset and Adjust a Garage Door’s Sensitivity

If you have just moved into a new home and are suddenly experiencing problems with your garage door, the problem may be a simple fix, such as the sensitivity being a little off. Quite common for new homes, this issue requires little to no knowledge to fix. All you have to do is gain access to your garage door opener. This is the large mechanical box at the top of your garage. Although each opener is different, most will have a rest button located in the back. You may choose to reset the entire opener or simply adjust the sensitivity. In many cases, it is simply best to read your owner’s manual to learn what the recommendations are for your particular opener. Of course, if you do not feel comfortable moving things around up there, you should contact a professional skilled in garage doors.

Issues With Your Eye Sensor

Every garage door opener works in collaboration with an eye sensor. The way it works is that when you point your controller towards the opener, the motor will signal to the sensor to open or close the door. However, if there are large amounts of items or debris present, that signal can become significantly weak. This results in your door opening only halfway.

To fix this issue, you first need to find it. This sensor is often located at the bottom sides of your garage door. First, remove anything that may be potentially locking the sensor, such as lawn equipment or a box. If that does not fix the issue, your sensor may simply be dirty. Because it is so close to the outside, dirt and grime can quickly build up on it. Simply grab a wet soft cloth, and begin removing as much of it as you can. In many cases, this should be enough to remove the dirt and to allow your sensor to fully open your door once again.

Tracking System Issues

When your door isn’t moving all the way up, you also want to look for other odd behaviors from it. For example, is it crooked, and does it make a loud metallic noise as it attempts to move up and down the tracking system? If you answered yes to even one of those questions, you might have a garage door that has gone off its tracks.

First, never attempt to simply pull it down as this can cause damage to the tracking system. This would require additional garage door repairs, which can significantly raise the cost of your repairs. With experience in this type of situation, you can simply force the wheels of your garage door back onto the tracks using a mallet. Otherwise, contact a garage door repair company to deal with the issue. You would not want to damage the tracking system attempting to force a wheel onto it. If the issue isn’t too bad, the repair can be completed in about two hours or so.

Accidental Emergency Manual String Pulled

In some cases, you may have simply pulled the emergency manual string, and that has caused the door to suddenly stop working. The emergency manual string is that long red string hanging from your door opener. Use this when you have no power within the home and need to open your door manually. Of course, because this string is so long, you may have accidentally pulled it moving boxes or simply pulling in with your car/truck. If this is the case, your motor may still sound like it’s running, but because it’s not connected to the door itself, it’s not going to do anything.

Now, you need to connect it back onto the motor. If your door is in manual mode, that means you can easily move it up and down on your own. If possible, simply run the door along the tracks, and that should reconnect it to the motor. Another way to do it is to simply pull the string towards the inside of your garage. In both instances, you should hear a loud click that indicates that the door has been connected to the motor once again.