Torrance Garage Doors: Common Mistakes Made During DIY Repairs

Torrance garage doors don’t last forever. Even with perfect maintenance, components will break eventually. Still, things could stop working even sooner if you attempt to repair things improperly. Often, DIY repairs can be a nice way to save money. However, in many instances, it costs you more in the long run. If you aren’t sure how to repair things, it’s easy to make mistakes. Then, you’ll have to hire someone else to clean up afterward. Usually, we’ll encounter many of the same issues. So, if you have been considering some DIY repairs, keep the following issues in mind. On many occasions, we found these after people attempted such repairs.

Torrance Garage Doors: Ensuring Your Garage Functions Optimally

To perform at their best, Torrance garage doors should be well maintained. As a result, it’s not uncommon for people to maintain them by themselves. Most of the time, this isn’t an issue. However, if you attempt to fix something beyond your skill level, it might not be the best idea. Suppose you broke something while trying to repair it. If that happens, then you’ll have even more issues on your hands. Thus, while maintaining your garage, avoid the following problems. That way, you won’t have to make an unnecessary call to the technician.

For New Installations, Not Taking Measurements Before Starting the Project

It’s easy to assume your garage has enough space for the door of your dreams. However, unless you use a measuring tape, there aren’t any guarantees. You could go through the work of installing it. Nevertheless, until you have the door at your location, you will know whether it fits. At that point, you will have paid for shipping already. If you need something with different dimensions, it’s going to cost a fortune. Fortunately, this is among the easiest mistakes to avoid. By using your measuring tape, you’ll know the exact dimensions of your garage. That way, whatever you purchase will fit perfectly.

Misaligned Tracks

So, you’ve got a door that fits your garage. However, after installing it, it still isn’t working properly. Most of the time, if something like this occurs, the tracks are causing the issue. Consequently, you’ll need to align them. Without properly aligned tracks, lifting your garage door is a struggle. On the whole, aligning tracks isn’t all that difficult. As long as you have a level, you’ve just got to ensure they match. If both sides of the tracks yield the same results, then you’ve done the job correctly.

Rollers Without Any Lubricant

Of course, even if the tracks are aligned, your rollers have to carry the weight. Consequently, friction can wear them down quickly. To avoid such issues, always supply lubricant. Without any lube, rollers don’t last for very long. Thus, every time you clean them, always apply a fresh coat. Otherwise, you’ll have to replace them sooner rather than later. If we had to guess, you’d like to avoid that if possible.

Tightening Hardware Too Much

When you install Torrance garage doors, there’s lots of hardware to put in place. From screws to nails, it’s a lot of work. For the most part, people tend to use them properly. Nevertheless, on some occasions, they will put them on overly tight. When you tighten them too much, it puts stress on the hardware. Ultimately, if you exceed their capacity, they will fail. At that point, you’ll have to get new ones. Otherwise, what would hold the rest of your garage together?

Failing to Adjust the Counterweights

Does your garage stay in place if you leave it partly open? If not, then the counterweights are not balanced appropriately. If they are, you can leave the door open halfway without it moving. Luckily, these adjustments aren’t all that complicated. So, if you have such a problem, it’s not too difficult to fix. By reviewing the counterweights, you should find the problem. Then, you’ll just need to adjust them. On the other hand, if you aren’t sure how to proceed, you can always call a professional. Once they arrive, within a few minutes, your garage will work perfectly.

Not Balancing the Garage Door

For your garage, to both sides of the door and touch the ground? If not, then you’ll need to adjust its balance. Typically, when the garage is closed, it should look like it’s lying flat. If not, then something isn’t right. If you leave something like this as it is, you’ll have even bigger problems on your hand. Without a proper seal, the garage doesn’t create a sufficient barrier. At that point, little critters scamper in underneath the door. Now, you’ll have to call of garage technician. Plus, you might need an exterminator as well. By balancing the door appropriately, you won’t need either of them. However, unless you double-check your work, it’s difficult to know whether the door is balanced.

Attaching the Torsion Springs Incorrectly

Finally, torsion springs are among the most important parts of your garage door. These pulled the door up when the motor is on. Unless they are in good shape, your garage might move unsteadily. When your garage behaves like that, take a look at the torsion springs. Perhaps, you’ll need to find replacements. On the other hand, it might just be a slight adjustment. Either way, until those are fixed, your garage will have problems.